 |
|
| BICYCLE POSITIONING SERVICE |
$100.00 |
| Shaws’ has been known for almost three decades for our expertise in fitting cyclists for maximum comfort, performance,as well as, injury prevention and rehabilitation. Allow 2 hours; your position will be observed while riding through a series of light exercises which demonstrate base flexibility. Basic cycling biomechanics will be explored and riding position will be evaluated and corrected. If necessary body measurements will taken and position will be demonstrated with our Serotta Sizecycle. By request written recommendations will be supplied. |
|
| COMPONENT CONSULTATION SERVICE |
$50.00 per hour |
| No one bike shop can offer everything in the cornucopia of cycling. By request we offer this service to allow our customers draw on our extensive experience in component selection. You will be offered informed opinions on reliability, function, repairability, design features and use of the better cycling products available on the market. |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| PRE-EVENT TUNE |
$49.00 |
| Make an appointment; bring your bike a week before your event. We will road test, inspect, do minor adjustments and assure flawless performance of your bicycle. |
|
| ADJUSTMENT WITH SAFETY CHECK |
$80.00* |
| This service includes minor wheel truing, brake and derailleur adjustment and lube, bearing adjustment, chain lubrication and a safety inspection. |
|
| COMPLETE ADJUSTMENT SERVICE |
$155.00* |
| An in depth tune up. Your bicycle is partially disassembled, cleaned, front and rear dropouts are aligned. Wheels are trued and tensioned, chain, freewheel, cables, and pivot points are lubricated. All components are carefully inspected and adjusted. Finally your bicycle is road tested and evaluated. |
|
| STANDARD OVERHAUL |
$220.00* |
| In addition to the services provided on the complete adjustment service, hub, headset, and crank bearings are cleaned inspected and lubricated. |
|
| BICYCLE RESTORATION SERVICE |
$275.00* |
| We are unsurpassed in the scope of this service. Your bicycle is disassembled. The frame and forks are aligned on our surface tables then cleaned and waxed. As your bicycle is reassembled all parts are cleaned, inspected, and lubricated. Major frame repairs, internal rust preventative treatment, painting, facing, and wheelbuilding are available at an additional charge, A comprehensive test ride insures trouble free service from your restored bicycle. |
|
| BICYCLE ASSEMBLY |
$250.00 |
This service includes all machining and frame alignment,wheelbuilding, adjustments, and quality control adjustments at 100 and 500 miles. For questions about component selection please refer to our “component selection service.” “Fabrication” labor on new bike assemblies is subject to sales tax.
You may deduct $70.00 in labor cost for prebuilt wheels. |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| REAR DROPOUT AND GEAR HANGER ALIGNMENT |
$15.00 |
| Alignment has always been critical for both wheels and derailleurs, index shifting systems make proper alignment a must. |
|
| GEAR HANGER REAMED AND THREADED INSERT INSTALLED |
$25.00 |
| An effective alternative to dropout replacement. |
|
| FRAMESET ALIGNMENT |
$65.00 minimum |
| Your disassembled frame and fork will be checked for alignment,structural integrity and straightened on our surface tables as needed to assure maximum performance. This rate is based on a properly prepared bare frame. |
|
| COMPLETE FRAMESET PREPARATION |
$100.00 |
| The works. At Shaws’ all our pro frames receive this treatment. This service is absolutely necessary for optimal mechanical and biomechanical performance of your frame. All threads are chased, the seat tube is reamed and honed. The head tube, fork crown, and bottom bracket shell are reamed or tapped and faced. Frame and fork alignment will be corrected on our surface tables. The steering column can be cut to length and the fixed cup, fork crown race and head cups can be installed for no additional charge. Not all procedures are applicable to non ferrous frames. |
|
| FRAME STRAIGHTENING |
$45.00 minimum |
| We can do lots of creative things, quick fixes, rolling out some dents; making your bike simply work better. Applicable to ferrous frames. |
|
| REAR TRIANGLE ALIGNMENT |
$55.00 minimum |
| We can solve shifting problems or modernize that old “twelve speed.” |
|
| BRAZE-ONS |
$20 set up
$10 each minimum |
| Cable guides, water bosses, brake bosses, etc. |
|
| DROPOUT REPLACEMENT |
$120.00 each |
| Our service department is able to perform a wide range of frame repairs or modifications. Most steel frames may be repaired. Parts are extra. |
|
| FORK STRAIGHTENING |
$50.00 minimum |
| Forks are aligned on our machinist table. Price quoted is for forks brought in alone. |
|
| FORKS INSTALLED |
$30.00 minimum |
|
| FORKS THREADED |
$20.00 minimum |
| Threading over 2cm is at $3.00 per cm. We have ISO, British, Italian, French, Whitworth, and 1 1/8" and 1 1/4" oversized dies. |
|
| STEERING COLUMN CUT TO LENGTH |
$20.00 |
| With varying stack heights of competing headsets the steerer must be fitted for proper spacing. |
|
| FORK CROWN DRILLED FOR BRAKE |
$25.00 minimum |
|
| FORK CROWN FACED |
$15.00 minimum |
| Essential for bearing alignment. We have 1", 1 1/8" and 1 1/4" tools. |
|
| HEAD TUBE REAMED AND FACED |
$30.00 minimum |
| Essential for bearing alignment. |
|
| REAM AND HONE SEAT TUBE |
$15.00 minimum |
| Reaming eliminates seat lug distortion allowing the fitting of a proper diameter seat post. Honing polishes the inside of the seat tube eliminating scratches and allowing free seat post movement. |
|
| BOTTOM BRACKET SHELL TAPPED |
$18.00 minimum |
|
| BOTTOM BRACKET TAPPED AND FACED |
$35.00 |
| Essential for bearing adjustment. This service is a prerequisite for surface table work. |
|
| CRANK BEARING OVERHAUL |
$25.00 |
|
| CRANK BEARING INSTALLATION |
$30.00 |
|
| CARTRIDGE CRANK BEARING INSTALLATION |
$30.00 |
| We will tap the shell to eliminate distortion. |
|
| BOTTOM BRACKET SHELL REAMED AND TAPPED ITALIAN |
$55.00 each |
| One cost effective way to save a thread damaged frame. |
|
| HEADSET OVERHAUL |
$20.50 |
|
| HEADSET ADJUSTMENT |
$8.00 |
|
| HEADSET INSTALLATION |
$40.00 maximum |
| This includes all prep work. |
|
| FRAME PAINTING |
please ask |
| Painting is subcontracted. When possible frames are returned to the builder for painting. Allow three to eight weeks. |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| WHEELS ASSEMBLED |
$60.00 |
| We offer proven components, proper design, and careful tensioning, stressing, and retensioning, our master wheelbuilder has around three decades of shop and race support experience. |
|
| WHEELS ASSEMBLED, TIED AND SOLDERED |
$65.00 |
| This creates a stiff durable wheel, recommended for tandems, sprinters, and bicycle camping. Not for general road work. |
|
| WHEELS TRUED,TENSIONED, AND DISHED |
$16.00 |
| There is an additional charge for remounting tubular tires. |
|
| WHEELS TRUED, TIED, AND SOLDERED |
$30.00 |
|
| FRONT HUB OVERHAUL |
$15.00 |
|
| REAR HUB OVERHAUL |
$18.50 minimum |
| Track rear hubs are charged as front hubs. |
|
| FRONT OR REAR HUB ADJUSTMENT |
$5.00 minimum |
|
| HUB CUP REMOVAL/INSTALLATION (classic Campagnolo) |
$20.00 |
|
| REAR HUB RETHREADED (Freewheel) |
$15.50 |
| We can save your damaged threads or cut your Italian hub to accept an English freewheel. |
|
| CARTRIDGE BEARING HUB SERVICE |
$20.00 minimum |
|
| INTERNALLY GEARED HUB OVERHAUL (Sturmey/Shimano) |
$75.00 |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| TUBE OR TIRE INSTALLATION |
$8.00 |
|
| TUBULAR TIRE INSTALLATIONS |
$12.00 |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| CRANK INSTALLATION |
$15.00 minimum |
|
| CRANK COTTER INSTALLED |
$15.00 each |
|
| CRANK ARM TAPPED |
$10.00 each |
|
| CRANK ARM TAPPED AND THREADED INSERT INSTALLED |
$23.00 each |
| We can repair your stripped threads. |
|
| PEDALS INSTALLED |
$7.00 |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| FREEWHEELS REMOVED |
$7.00 minimum |
|
| TRACK COGS REMOVED |
$5.00 |
|
| FREEWHEEL COGS REMOVED OR INSTALLED |
$7.00 minimum |
|
| CHAIN INSTALLATION |
$7.50 |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| HAND BRAKES ADJUSTED |
$25.00 |
| We do it right. We grease cables, oil pivot points, and adjust, enabling your system to operate properly. |
|
| HAND BRAKES INSTALLED |
$35.00 |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| DERAILLEURS ADJUSTED |
$25.00 |
| Both derailleurs are part of a system. |
|
| DERAILLEURS INSTALLED |
$39.50 |
|
| HANDLEBAR SHIFTING SYSTEM INSTALLED |
$40.00 minimum |
| STI, Ergo, Sram, etc. |
|
| CAMPAGNOLO ERGO LEVER OVERHAUL |
$50.00 |
| Removal, reinstallation and derailleur adjustment is an additional charge. |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| HANDLEBAR OR STEM INSTALLED |
$35.00 minimum |
|
| HANDLEBARS TAPED |
$8.00 minimum |
|
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services
What's New | Home Page | Track Stuff
|
|
|
 |
|
| SPOKE LENGTH CALCULATION |
$5.00 |
| We need rim, hub, and lacing pattern. |
|
| FENDER INSTALLATION |
$20.00 minimum |
|
| TOURING RACK INSTALLATION |
$20.00 minimum |
|
| LIGHTING SYSTEMS INSTALLATIONS |
$20.00 minimum |
|
| CYCLOCOMPUTER INSTALLATION |
$10.00 minimum |
| Flitedeck or ergobrain are extra cost. |
|
| CYCLOCOMPUTER TROUBLE SHOOTING OR PROGRAMING |
$50.00 hour |
|
| MACHINING AND FABRICATION |
$25.00 minimum |
| We have bicycle related machine shop capabilities. |
|
*Labor rates are based on normal circumstances.
Rates do not include parts.
Work is completed on day scheduled, to be ready for 5:00 PM pickup.
This page last updated November 20,2006
Specialty Services By Appointment / Service Packages / Frame And Forks / Wheels / Tires And Tubes / Cranks And Pedals / Freewheels And Chains / Brakes / Derailleurs / Handlebars And Stem / Miscellaneous Services |
